Hedge shears

The hydraulic hedge shears enable wood to be cut and collected in a single operation. The shears are able to cut through logs up to 280 mm in diameter. Once the cut has been made, the grab attachments take hold of the log and set it down on the retainer,. so that it can be transported to and unloaded in the required location.

Felling-collecting equipment

Depending on tree type and bush size, up to fifteen logs can be bundled in the unit before it needs to be emptied. This both minimises motion sequences and noticeable increases productivity. A special blade is used for felling. The hydraulic blade is significantly more cost-efficient than that of a chain saw under identical conditions.

Harvester

The Woody is ideal for use interchangeably as a harvester or processor. Thanks to its grab function, the Woody is able not only to load timber but also to prepare timber on slopes for easier transportation using a cable winch. The unique and patented frame also supports the processing of hardwood and knee timber.

Cutting-chain-chopper

The TW 1500 uses a rotating chain to cut grass, reeds, hedges, bushes and underwood quickly and with virtually zero wear. The mulcher is open at both ends in order to facilitate both forward and reverse mowing.. The chain screen extends the cover which provides protection against the risk of impact from flying stones.

Forest mulching unit

The forest mulching machine is used efficiently for forest and wood management, clearing roads and river banks, maintaining slopes, removing high grass, reeds and undergrowth in local/forest areas and water management. Thanks to the solid, robust design, lumber of up to 150 mm in diameter can be processed efficiently.

Advantages of the forest mulching machine: the cutter bits are welded to the rotor in spirals. This means that less power is required during mulching, because only one cutter bit at a time ever touches the material.